Start and mount the physical standby database: SQL> STARTUP MOUNT;Start Redo Apply or real-time apply: To start Redo Apply, issue the following statement: SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE 2> DISCONNECT FROM SESSION;

How do I start recovery in standby database?

  1. Start the database: SQL> STARTUP NOMOUNT;
  2. Mount the standby database: SQL> ALTER DATABASE MOUNT STANDBY DATABASE;
  3. Start the managed recovery operation: SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE 2> DISCONNECT FROM SESSION;

How do I start MRP in parallel?

  1. Start MRP process with number of parallel process. ALTER DATABASE RECOVER MANAGED STANDBY DATABASE PARALLEL <no of process> DISCONNECT FROM SESSION;
  2. Now check the MRP Active apply speed.

How do I check my MRP process in standby database?

  1. 1.To Start media recovery on standby database : SQL> alter database recover managed standby database disconnect from session;
  2. Perform few log switch on Primary database. SQL> Alter system switch logfile; SQL> / SQL> /
  3. Monitor Various process on standby database by :

What is MRP in standby database?

The managed recovery process (MRP) applies information from the archived redo logs to the standby database. When performing managed recovery operations, log apply services automatically apply archived redo logs to maintain transactional synchronization with the primary database.

How do I enable standby database?

Activate the standby database: SQL> ALTER DATABASE ACTIVATE PHYSICAL STANDBY DATABASE; Database altered.

How do you stop and start MRP process in standby database?

  1. Start and mount the physical standby database: SQL> STARTUP MOUNT;
  2. Start Redo Apply or real-time apply: To start Redo Apply, issue the following statement: SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE 2> DISCONNECT FROM SESSION;

How do you resolve MRP stuck issues on a physical standby database?

  1. % ps -ef |grep -i mrp. …
  2. PROCESS THREAD# SEQUENCE# STATUS. …
  3. SQL>recover managed standby database cancel; …
  4. DGMGRL> EDIT DATABASE ‘<standby db_unique_name>’ SET STATE=’APPLY-OFF’;

How do I check my standby backlog?

How to find out the backlog of standby? from v$archived_log a, (select process,SEQUENCE#, status from v$managed_standby where process like ‘%MRP%’)m where a. SEQUENCE#=(m. SEQUENCE#-1);

How do you use redo log standby database?

1 Starting Redo Apply. To start log apply services on a physical standby database, ensure the physical standby database is started and mounted and then start Redo Apply using the SQL ALTER DATABASE RECOVER MANAGED STANDBY DATABASE statement.

Article first time published on

How do I manually register Archivelog in standby?

At standby site, Do the log file registration at the standby site until all the missing log files are registered, Use this below command. SQL> alter database register logfile ‘/log/file/location/log_file_name_n. arc’; Now apply would take place and your standby will become sync with the primary.

How can I speed up my MRP?

How to Speed up and Troubleshooting MRP (Log Apply Rate of a Standby Database) Stuck Issues. 3) Consider increasing sga_target parameter, if it’s set to low. 4) Check for Disk I/O. Move you I/O intensive files to faster disks including Online Redo log and Standby redo log files.

What is multi instance redo apply?

Starting with Oracle Database 12.2, Multi-Instance Redo Apply (MIRA) greatly improves scalability of redo apply for Oracle RAC databases. Instead of merging all threads of redo into a single apply process, multiple apply instances divide the threads of redo between the apply instances.

How do I recover data from standby database?

  1. CANCEL THE RECOVERY( STANDBY) SQL> recover managed standby database cancel; Media recovery complete.
  2. 2 . START STANDBY IN MOUNT STAGE( IF IN READ-ONLY MODE): …
  3. RESTORE THE DATAFILE ( STANDBY) …
  4. START THE RECOVERY ( STANDBY) …
  5. CANCEL RECOVERY AND START DATABASE IN READ ONLY: …
  6. 6 .

How do I create a datafile in standby database?

To create a datafile in a standby database, use this script: SQL> alter database create datafile ‘/oracle/app/oracle/product/12.1. 0.2/dbhome_1/dbs/UNNAMED00005′ as new; database altered.

How do I stop Oracle media recovery?

  1. Start SQL*Plus and connect to Oracle with administrator privileges. …
  2. Start a new instance and mount the database: STARTUP MOUNT.
  3. Begin cancel-based recovery by issuing the following command: RECOVER DATABASE UNTIL CANCEL.

How do I get rid of Recover auto standby database?

The AUTOMATIC option automatically generates the name of the next archived redo log file needed to continue the recovery operation. Cancel recovery after the Oracle database server has applied the available logs, by executing the following statement (or typing CTRL+C): SQL> CANCEL Media recovery cancelled.

What is V Archived_log?

V$ARCHIVED_LOG displays archived log information from the control file, including archive log names. An archive log record is inserted after the online redo log is successfully archived or cleared (name column is NULL if the log was cleared).

How do I create a standby database read write?

  1. 1.) Open standby database in mount state :
  2. 2.) Recover if there is any archive logs:
  3. cancel.
  4. 3.) Finish the Recovery process :
  5. 4.) Activate the Standby Database :
  6. 5.) Check the new status.
  7. 6.) Open the Database.

How do I activate physical standby?

  1. Step 1 (Optional) Identify and resolve any gaps in the archived redo log files. …
  2. Step 2 Initiate the failover operation on the target physical standby database. …
  3. Step 3 Convert the physical standby database to the primary role. …
  4. Step 4 Shut down and restart the new primary database.

How do I connect to a standby database?

Standby Recovery SQL> CONNECT sys/password AS SYSDBA SQL> STARTUP NOMOUNT PFILE=C:\Oracle\Admin\SID\PFile\init. ora SQL> ALTER DATABASE MOUNT STANDBY DATABASE; SQL> RECOVER STANDBY DATABASE; This process must be repeated every time archive logs are manually transfered.

Where is my standby database primary?

You can find all standby databases for a primary database in data guard by using one of the queries below. Standby -> Returns the unique name of the current database. Primary -> Returns the unique name of the other database in the Environment.

How do I know which standby is primary or sync?

Following command will help to check the Standby is sync with Primary Database in Oracle Dataguard Environment. select thread#, max(sequence#) “Last Standby Seq Applied” from v$archived_log val, v$database vdb where val. resetlogs_change# = vdb.

How will you verify that the standby is in sync with primary?

  1. Check the name and status of database.
  2. Check for GAP on standby.
  3. Check redo received on standby.
  4. Check redo applied on standby.
  5. Identify missing archive log files.
  6. Copy archive log files.
  7. Register archive log files with standby.

How can I tell if a database is standby?

You can use the DGMGRL show configuration and show database database_name commands to confirm the Data Guard Standby database configuration before enabling a standby database. Here is how you enable your primary and standby databases using the DGMGRL command: DGMGRL> enable configuration; Enabled.

How do I know if archive logs are applied to standby database?

  1. select dest_id , sequence# , applied.
  2. from v$archived_log.
  3. where dest_id = 2.
  4. and sequence# > ( select max(sequence#) – 10 from v$archived_log )
  5. order by sequence#
  6. /
  7. DEST_ID SEQUENCE# APPLIED.

How do I copy archive logs from primary to standby ASM?

  1. Check the GAP between Primary and Standby enviornment. …
  2. Check the location of archive missing. …
  3. Use RMAN Copy for get Archive log from ASM Diskgroup and copy to local disk. …
  4. SCP or FTP the archive logs from production to standby.

What is LNS process in Data Guard?

LNS process of primary database captures redo from redo log buffer. … Once with any possible way redo are written to standby redo log files then , MRP [in case of physical dataguard] or LSP [in case of logical dataguard] process apply that redo or sql to standby database.

How do I create a standby redo log?

  1. Step 1 Ensure log file sizes are identical on the primary and standby databases. …
  2. Step 2 Determine the appropriate number of standby redo log file groups. …
  3. Step 3 Verify related database parameters and settings. …
  4. Step 4 Create standby redo log file groups.

How do I start redo?

To start Redo Apply in the foreground, issue the following SQL statement: SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE; If you start a foreground session, control is not returned to the command prompt until recovery is canceled by another session.

How do I start SQL Apply in logical standby?

To start real-time apply on the logical standby database, issue the following statement: SQL> ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE; Oracle recommends that you run SQL Apply in the real-time apply mode.