A 4″ x 4″ wooden support or a 2″-diameter standard steel or aluminum pipe.Avoid unyielding and potentially dangerous supports, like heavy metal pipes, concrete posts, and farm equipment (e.g., milk cans filled with concrete).Bury your post no more than 24″ deep.

How deep do you dig for a mailbox post?

  1. A 4″ x 4″ wooden support or a 2″-diameter standard steel or aluminum pipe.
  2. Avoid unyielding and potentially dangerous supports, like heavy metal pipes, concrete posts, and farm equipment (e.g., milk cans filled with concrete).
  3. Bury your post no more than 24″ deep.

Does a mailbox post need concrete?

Concrete will provide a strong and stable foundation; however, it isn’t required. … Once the concrete has dried, additional dirt can then be distributed on top of the concrete and around the mailbox post. If you want to forgo using concrete, another option is to fill the remaining depth of the hole with dirt.

How long does it take to install a mailbox post?

Installing a new mailbox is a simple project that can be completed in just one day.

How much concrete do I need to install a mailbox post?

Most mailbox post installations require a 60 lb. bag of dry concrete.

What side of the driveway does a mailbox go on?

In Closing. Mailboxes in the United States of America should be on the right-hand side of the road. This makes it so your mail carrier can drive up to your mailbox and deliver your mail without getting out of their vehicle.

Are you liable if someone hits your mailbox?

Hitting a mailbox is similar to other minor traffic accidents and should be reported to the mailbox owner or the police. Because a mailbox is personal property, you or your insurance company will be liable for its repair or replacement. Leaving the scene of a collision with a mailbox is a crime in most jurisdictions.

How do I secure a mailbox post in the ground?

Pour concrete powder into the hole, leaving 4 to 5 inches (10 to 13 cm) of space at the top. Keeping the mailbox post as level as you can, begin pouring the dry concrete powder into the hole. Space it evenly around the post, so that the post remains in the center of the hole.

How much quikrete do I need for a mailbox post?

Most mailbox posts will need 2 bags of Quikrete to set, but before starting use this calculator to determine how many bags you need!

What kind of wood should I use for a mailbox post?

The two most common types of mailbox posts are made of cedar (pictured below on the right) and pressure-treated wood (pictured below on the left). Cedar posts are typically more expensive and decorative than treated posts, and will not warp or shrink , as is common in treated wood.

Article first time published on

What height should my mailbox be?

According to United States Postal regulations proper placement of a mailbox means at least 41 and no more than 45 inches about ground and no part of the mailbox may be closer than 8 inches behind the back of the curb (see illustration).

Can I use quikrete for a mailbox post?

You’ve Got Mail Whether you’re replacing an old mailbox or installing a brand-new one, setting the post in Quikrete will keep it standing steady in rain or shine. … Simply drive the mailbox post into a hole filled with Quikrete All-Purpose Gravel, then top with Quikrete Fast-Setting Concrete and water.

What to do if someone hits your mailbox and drives off?

It is a hit and run traffic incident with property damage. Just as if they hit you car. File a complaint with the police and make a traffic incident report with the state. The other drivers insurance company will have to replace your mailbox.

What do you do if someone runs over your mailbox?

file a police report. submit a claim with the liable driver’s auto insurance company. purchase a new mailbox that is comparable to the damage one and keep your receipt for insurance reimbursement purposes.

What do you do if someone knocks over your mailbox?

  1. If you know of someone who committed an act of mailbox vandalism, report it to the Postal Inspectors.
  2. If you see someone actively tampering with a mailbox, immediately report it to the police.
  3. Talk to your children about the consequences of damaging mailboxes.

Is it illegal for a mailman to not deliver mail?

Ruiz said carriers may refuse to deliver mail to places they feel are unsafe or threatening, such as a home with a dangerous dog. However, the Postal Service is supposed to leave a written notice to residents if they stop deliveries, telling them where to pick up their mail. That was not done in this case.

Should mailbox be before or after driveway?

The house is usually set up for mail delivery/ mailbox on the curb before you move in. Furthermore the mailbox should be where the carrier can deliver the mail safely and you have plenty of room to park in front of your house.

Can I just put up a mailbox?

Important: Before installing, moving or replacing your mailbox or mailbox support, you will need to contact your Postmaster or mailperson from your local Post Office™. All mailboxes must be approved by the Postal Service™. Custom made mailboxes will be approved by the Postmaster if they meet established standards.

What kind of concrete should I use for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

How do you stabilize a post?

Stabilize Your Fence Post You’ll first want to dig a few inches of soil out from around the post’s perimeter. From there, you can fill the hole with gravel and top the gravel with a rapid-set cement mix. Finally, pound the fence post back into place using a mallet.

How big of a hole do you need for a 4x4 post?

The diameter of your post hole should be three times the diameter of your post. So, if you’re planning on using a four-inch round or 4×4-inch square post, your post hole will need to be 12 inches in diameter. For a six-foot-high fence post, we would need a hole that’s 36 inches deep and 12 inches in diameter.