An Allen key or Allen wrench is also known as Hex key.
What is Allen key tool?
A hex key (also, Allen key and Allen wrench) is a simple driver for screws that have heads with internal hexagonal recesses (sockets). Hex keys are formed from a single piece of hard steel hexagonal rod having blunt ends that fit snugly into similarly-shaped screw sockets.
What is Torx key?
Torx keys are also commonly known as star keys. Like hexagon allen keys, most torx keys are small enough to be carried in a pocket and enable the user to drive the appropriate fasteners without needing a separate screwdriver or power tool.
Why is it called an Allen wrench?
The “Allen screw” name for the socket head cap screw and “Allen key” for the wrench originate from the products of the Allen Manufacturing Company of Hartford, Connecticut. According to Bates, it is widely reported that the company trademarked the name “Allen wrench or key” for its range of hex wrenches in 1943.What is the hexagon tool called?
A hex key, also known as an Allen key or Allen wrench, is a small handheld tool that’s used for for driving bolts and screws with a hexagonal socket.
Is hex key same as Allen key?
A hex key, also known as an Allen key is a simple tool used to drive bolts and screws with hexagonal sockets in their heads.
What are the two types of Allen wrenches?
- L-Style Allen Wrenches. This is the standard Allen key and is easily found anywhere. …
- T-Handle. This is a popular tool, mostly used in motorsport applications. …
- P-Handle. …
- Folding Hex Key. …
- Ratcheting Drivers. …
- Torque Wrench. …
- Allen Screwdriver. …
- Ball Hex Sets.
What is a TX bit?
Torx (pronounced /tɔːrks/) is a trademark for a type of screw drive characterized by a 6-point star-shaped pattern, developed in 1967 by Camcar Textron. A popular generic name for the drive is star, as in star screwdriver or star bits. … Torx screws are also becoming increasingly popular in construction industries.What is the difference between Hex and Allen wrenches?
This article is aimed to help you figure out the difference between an Allen wrench and a hex key. The short answer is “there is no difference”. Really, these two names can be used interchangeably.
What is a Robertson screw head?A Robertson screw, also known as a square screw or Scrulox, is a type of screw which has a square-shaped socket in the screw head and a square protrusion on the tool. Both the tool and the socket have a slight taper.
Article first time published onIs there a difference between star and Torx?
So what’s the difference? Torx is a licensed product and requires manufacturers to follow their part prints. We feel that our Chapman star bits are an improvement on the official Torx bits. … To answer the question, Chapman star bits fit Torx screws just as well as Torx bits, but are an overall improved design!
Where are Bondhus tools made?
Bondhus Corporation is located in Monticello, Minnesota – USA; about 40 minutes from Minneapolis. Bondhus employees are proud of our Company and the tools we make. Our Ball, Hex, and TORX® tools are made in our Monticello manufacturing facility, just across the street from the Mighty Mississippi River.
What are allen key screws called?
Socket Head Cap Screws, which are also known as Allen head screws are stock items at Lightning Bolt in many materials sizes. These screws come with a hexagonal cross-section socket in the head and require an Allen wrench or hex key to drive them into material and secure them into a structure.
What are Allen wrench sizes?
Adding to our precision sizes, the common SAE Allen wrench sizes are 1/16″, 5/64″, 3/32″, 7/64″, 1/8″, 9/64″, 5/32″, 3/16″, 7/32″, 1/4″, 5/16 “, & 3/8″. If we were to try to narrow down the Imperial sizes into a most popular list, it might include 1/8″, 3/32″, 7/64″, 5/32″, 3/16″, 1/4″, & 7/32″.
What are star wrenches?
Long Arm Hex Key Wrench Set offers the most common Star hex wrench sizes to remove and install most star screws found in cars, furniture, equipment, and more. The versatile long arm/short arm design offers extra reach on one end, and extra leverage on the other.
How do you use an L Key?
When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt. Of course, the Allen wrench will only fit in a hex bolt (a bolt with six sides), so don’t try using the Allen wrench to screw in any other type of fastener.
What are Imperial keys?
ALLEN KEYS metric imperial AF sizes Allen wrench is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive).
What is socket ratchet?
A ratchet and socket combination (sometimes called a socket wrench) lets you turn a nut or bolt without repositioning the tool on the fastener — like you need to do with a wrench when there isn’t enough room to turn it in a full circle. This can make the work quicker.
Why do some technicians use Allen keys?
Why do some technicians use Allen keys instead of self-tapping screws to fasten joint? … To summarize, a hex key is a tool having a hexagonal socket that is used to drive nuts and screws. They are easier to use and less prone to strip than their Phillip’s head equivalent since they have six driving points.
What is SAE vs metric?
Metric and SAE wrenches have different systems of measurement. Metric sockets and wrenches use the metric measurement system. … SAE wrenches use the imperial measurement system, mostly used in the United States, where it’s described using inches, or fractions of an inch. For this, you’d get a 1/3inch wrench or socket.
What can I use in place of an Allen wrench?
- Hex Wrench of Hex Key Wrench. …
- Torx Key. …
- Torque Wrench. …
- Things Around the House. …
- In Your Kitchen. …
- Screwdrivers. …
- Nuts and Bolts. …
- Open Ended Wrench or Combination Wrench.
What are Phillips screws?
: a type of screw that has a slot in its top that looks like a cross.
What is a TX screw?
A Torx screw is a type of screw characterized by a six-lobed, star-patterned screw drive. Torx drive is a trademark commonly referred to as star drive or, simply, a six-lobe. It’s often abbreviated to TX or 6lobe. … Torx screws were invented in 1967, by Camcar Textron, as an improvement on contemporary drive types.
What is a Torx Plus bit?
Torx Plus® bits and fasteners feature a greater engagement area for higher torque transfer and reduced camout when driving Torx Plus® fasteners. They can provide up to 100% more drive cycles. Torx Plus® bits are not compatible with standard Torx® fasteners.
What is Panhead screw?
Pan head screws are a common head type of non-countersunk screw head used in wood screws, self-tapping screws, self-drilling screws, and machine screws. They have wide heads, a flat bearing surface, high vertical, chamfered, or curved sides, and a flat or slightly domed top surface with a recessed socket.
What is the name of the square screwdriver?
The Robertson screwdriver, also known as a square screwdriver, was invented in 1908 by P.L. Robertson, a native Canadian.
Why are there no Robertson screws in America?
Most historians attribute its lack of popularity in the United States to Henry Ford. Having been nearly bankrupted by shady European licensees, Robertson refused to license his invention to Ford. Without a guaranteed supply, Ford turned to the Phillips-head screw, cementing its reign in American industry.
Which is better Torx or square?
The square drive provides a more positive bit engagement making it harder for the heads to strip out. Most other types of deck screws use a Philips head or a variation of a Philips type drive and some use a Torx style bit drive. … Using an impact driver also helps to drive screws without stripping the heads.
Is Triple square the same as Torx?
Torx comes in the start-like shape, while the Triple Square has three squares at all 90-degree angles. … At the same time, Torx only uses for vehicles. They are not the same; read the below content and found their differences.
What does a Torx bit look like?
A Torx head screw is a specialty screw with a six-pointed star design in the screw head. The trademarked Torx shape is sometimes referred to as six-point, six-lobe or star drive. Tightening or loosening Torx screws also requires Torx bits or drivers.
Are Bondhus tools any good?
Bondhus hex keys and hex tools are very well built. They might be the last hex tools you ever need. In addition to great quality and reasonable pricing, they’re made in the USA. I like the BriteGuard and GoldGuard finish drivers for hex keys, as they’re easier to clean and feel better in-hand.
