MagnaClean is a new magnetic filter designed to maintain and protect all domestic central heating systems from the damaging effects of iron oxide sludge build up. This protection lasts throughout the lifetime of the boiler and helps to reduce central heating energy bills by up to 6%.
What does a Magna Clean filter do?
The MagnaClean Magnetic Filter This filter protects the boiler; thus reducing breakdowns in the most expensive part of the system, and it prevents build up of iron oxide sludge in the radiators that would otherwise make them less efficient.
What is Magna clean for?
Magnaclean produces magnetic filters that fit on to a heating system. The magnaclean filter captures and stores metallic debris (particularly black iron oxide). Black iron oxide is created when a heating system’s water reacts with the steel and copper components within the system.
How long does a Magna clean last?
ProductWarrantyMagnaClean Pro 210 yearsMagnaClean Micro 210 yearsAll other ADEY MagnaClean filters2 yearsHow long does a MagnaClean filter last?
How long will Magnaclean last? The Magnaclean filter is a one-off purchase which is designed to last the lifetime of the heating system.
What happens if you dont clean your MagnaClean?
Without a MagnaClean filter, metal particles that are in the water circulating in the boiler collect as sludge within the system and cause the black water you see when you bleed a radiator.
Can a MagnaClean go on the flow?
Always follow the Standard Electrical Best Practice guidelines when installing MagnaClean Professional. A copy of these guidelines can be found at The inlet and outlet on MagnaClean Professional are reversible and there is no flow restriction.
How often should you change central heating water?
This depends on the material your radiators are made out of, the age and type of your boiler, and the hardness of your water. The short and generally agreed upon answer is that you should flush your radiators every 5 to 6 years.Does MagnaClean remove limescale?
It’s a common misnomer that the MagnaClean removes limescale. It does not. It only removes ferrous materials from the heating system. The only effective way to remove limescale is to fit a water softener.
Does MagnaClean go on flow or return?The pump should be on the flow side, so assuming that is correct then I would guess the horizontal pipe on the left is the return. The perfect place for it should be on the return, however, to do that will need a couple of bends in the pipe and you may not have enough room.
Article first time published onHow often should I clean MagnaClean?
How often does MagnaClean need to be serviced/cleaned? After initial installation and checking first pass capture of magnetite, usually once a year alongside the boiler service.
What is a magnetic system filter?
Magnetic filters, or boiler filters, are fitted to your boiler’s pipework, extracting any debris from the water flowing through the pipes so that there isn’t a build-up which can restrict the flow of water. Fitting a magnetic filter to your boiler could bring many benefits to your home: More efficient heating system.
How long does a boiler filter last?
Most of these filters will last at least two years on your boiler system, and some up to 10 years.
How often do you change a MagnaClean?
The MagnaClean filter must be cleaned out at intervals, but you can do this yourself in ten minutes; annually or more often if you prefer.
What is a MagnaCleanse system flush?
The MagnaCleanse system flush is the process of clearing your system of those harsh, unwanted materials. It thoroughly cleans your entire system – providing consistent protection to your pipes and boiler. The added benefit of a MagnaCleanse filter helps to collect sludgy residue away from your system for easy disposal.
How often should you clean central heating filter?
By adding a heating filter, you can greatly extend this lifespan – as long as you have the right maintenance in place. Most manufacturers recommend that a heating filter is checked and maintained every twelve months – you can have it done alongside your boiler servicing which should also be done on a yearly basis.
Can you fit a MagnaClean horizontally?
MagnaClean Professional can be fitted in any orientation. Each isolation valve can rotate through 360° making it possible to install in a vertical position on horizontal pipework.
What side does MagnaClean go on?
The Magnaclean cannot be fitted horizontally. It can be on an angle at the least of 45 degrees I would say. Best fit it on the CH return pipe. Take the in-line filter off – they don’t catch much anyway.
How do you put inhibitor in a combi boiler?
Adding inhibitor to a combi boiler system The inhibitor is added directly into a radiator either via the bleed valve or, in the case of towel radiator, the plug at the top. Select a radiator to add the inhibitor to (you only need to add it to one) and shut both valves on the radiator.
Is it worth flushing a central heating system?
Summary. Flushing a central heating system can be an involved and difficult task, though the benefits of doing so are absolutely worth it for the efficiency and long-term health of your home heating system.
Can you put too much inhibitor in central heating?
The simple answer is no. You can never add too much inhibitor to your central heating system and dosing it up cannot cause any damage. Adding more inhibitor is only a good thing for your system as it will provide even more protection.
Is power flushing a good idea?
Conclusion. So is powerflushing worth it? The answer to this depends on how affected your heating system is. If the entire system is showing signs of bad circulation or you notice more than two of the signs mentioned above then a powerflush will probably be worth the money you pay.
What is a magnetic filter on a boiler?
A magnetic filter is a device that collects debris build-up in a heating system. Cold radiators, strange boiler noises and even boiler leaks can be signs of sludge build up. Magnetic filters are usually fitted during the boiler installation, but can also be fitted onto an existing system.
What is boiler sludge?
Boiler sludge is a deposit that forms when suspended materials present in the boiler water settle on, or adhere to, hot boiler tubes or other surfaces. Sludge may be formed from a combination of whatever suspended materials are in the water, including loose corrosion products, insoluble mineral precipitates and oil.
What does inhibitor do in central heating?
What is central heating inhibitor? Central heating inhibitor is a chemical solution that is added into your central heating system. Its purpose is to stop rust and internal corrosion from occurring inside your heating system, which could reduce performance and efficiency.
Is a magnetic filter worth it?
Having a magnetic filter that’s regularly maintained will benefit you with long-term savings on energy bills, reduced repair costs and an extended lifespan on your boiler.
What is a magnetic flush?
A magnetic chemical flush involves adding a chemical to your central heating system to break down impurities, which are picked up by magnetic filters during the process. The chemical and loose debris are drained out with the water in the piping, which is then replaced with clean water and a chemical inhibitor.
Are magnetic filters for central heating a good idea?
The purpose of a magnetic filter is to catch most of the sludge that circulates around your heating system. … Without a magnetic filter, you will experience these issues and they will only get worse. A magnetic filter can help extend your boiler’s lifespan and reduce your energy bills.
Do boilers need filters?
Hi, Yes always recommend the filter to any boiler. It helps with the prevention of sludge and debris entering into the boiler from the system.
Who invented MagnaClean?
MagnaClean inventor Chris Adey whose company has collected a Queen’s Award for Enterprise in Innovation.
